The only difference to the explanations given for the experiments without evaluation ( Install | Configure and run test simulations) is that you have to specify the settings in ${SPDIR}/chain/gcm2icon/sp001_eva-suite/scripts_eva-suite/eva-suite_settings before you run spice. Please read here eva-suite_settings https://hereon-coast.atlassian.net/wiki/spaces/SPICE/pages/983205 to check the settings carefully and be aware of the format for the settings of EVAL_START, EVAL_END, SUBREGIONS and SUBREGIONS_ID.
If you have already done another experiment with SPICE in advance, then you can use this old experiment as a reference simulation and you can setup the Eva-Suite to compare your new test simulation against the reference simulation by specification of specifying REFID, REFDATADIR, and REFITYPE_TS. Otherwise, leave the three settings blank.
...
Be aware that you need to have at least a one-year experiment to achieve a convenient evaluation.
If you also want to evaluation evaluate the icon2icon experiments (downscalings of ICON), you need also to adapt the file eva-suite_settings there (icon2icon/sp002_eva-suite). Then, you can again start your simulation.
If you want to trigger the evaluation manually after your simulations simulation has finished, then go to the subchain directory of your experiment, edit scripts_eva-suite/eva-suite_settings, and type
| Code Block |
|---|
./subchain eva-suite |
...