Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Software Requirements

  • Fortran 90/95 and C compiler

  • MPI or OpenMP libraries

  • netCDF4 library linked with HDF5 and zip libraries and extended by the Fortran netCDF package (The netCDF4 package comes with the programs ncdump and nccopy)

  • UNIX utilities: make, ksh, uname, sed, awk, wget, etc.

  • For post-processing: Climate Data Operators (CDO) and netCDF Operators (NCO)

  • An ICON binary

CCLM_SP uses netCDF I/O of COSMO-CLM

The starter package is written for the HRLE–3 Mistral at DKRZ. Additional changes need to be applied on other machines. On the Mistral the Simple Linux Utility for Resource Management SLURM ist installed.
On mistral please use OPENMPI by setting

module load intel/17.0.2
module load openmpi/2.0.2p1_hpcx-intel14

export OMPI_MCA_pml=cm
export OMPI_MCA_mtl=mxm
export MCM_RDMA_PORTS=mlx5_0:1


Unpack and Configure

1. Copy the starter package from 🔑 RedC.
2. Unpack the starter package:

$ tar -xzvf cclm-sp-4.0.tgz
$ mv cclm-sp-4.0 yourpath/cclm-sp

3. Copy and unpack the supplementary data files for testing the starter package (the program wget needs to be installed on your system)

$ cd yourpath/cclm-sp/data
$ ./get_sp_ext.sh

4. Change to the directory yourpath/cclm-sp/configure_scripts
5. Adjust the settings in the file system_settings to your computer system
6. Type the following command to create a default test experiment

$ ./config.sh

this first compiles the necessary cfu program and the fortran-csv-lib, and then creates the test experiments ${SPDIR}/chain/gcm2cclm/sp001 and ${SPDIR}/chain/cclm2cclm/sp002.
or, if you want to create a default experiment including add-ons:

$ ./config.sh -a addon1,addon2,…

Compile

The source code for INT2LM, CCLM and the auxiliary program packages CFU and fortran-csv-lib need to be compiled for running a simulation with the regional climate model. INT2LM and CCLM needs to be compiled by yourself. CFU and fortran-csv-lib are automatically compiled when you run the config.sh script.

Compiler options are stored in the file Fopts for each program. You need to set the appropriate compiler options for your computer system.

Compile INT2LM

$ cd /$SPDIR/src/int2lm

Open the Fopts script with any text editor and change the fortran options according to your computer platform. Compile INT2LM:

$ make

If compilation is successful an executable $SPDIR/src/int2lm/bin/int2lm.exe is created.

You may try to perform a parallel make by typing:

$ make -j N

this results in a much faster compilation. Replace N by the number of requested processors.

Compile CCLM

$ cd /$SPDIR/src/cclm

Open the Fopts script with any text editor and change the fortran options according to your computer platform. Compile CCLM:

$ make

If compilation is successful an executable $SPDIR/src/cclm/bin/cclm.exe is created.

You may try to perform a parallel make by typing:

$ make -j N

this results in a much faster compilation. Replace N by the number of requested processors.

Run the test examples

There are two tests, one for testing CCLM with GCM or reanalysis data as initial and boundary conditions (${SPDIR}/chain/gcm2cclm/sp001) and one for testing CCLM with coarse grid CCLM data as initial and boundary conditions (${SPDIR}/chain/cclm2cclm/sp002). Actually sp001 creates the necessary input data for sp002.

Before you start the experiment look for the following environment variables in the job_settings of sp001 and sp002 file and adopt them to your needs.

PROJECT_ACCOUNT=  # your project account
EMAIL_ADDRESS=    # your email address if you want to get information when your job crashes or finishes

Now you should be ready to start the first experiment:

$ cd ${SPDIR}/chain/gcm2cclm/sp001
$ ./subchain start

This experiment is a two month simulation, 50 km / Europe / driven bei ERAInterim

The scripts are called in the order prep.job.sh, int2lm.job.sh, cclm.job.sh, arch.job.sh, post.job.sh.  If your job crashes in one of the scripts you do not have to run all the successful scripts again, but can start this script again after you made the corrections by submitting the appropriate command from the following list:

$ ./subchain prep
$ ./subchain conv2icon
$ ./subchain icon noprep
$ ./subchain arch
$ ./subchain post

After successful completion of the  SP001 experiment adopt the scripts in  SP002 and start this experiment:

$ cd ${SPDIR}/chain/icon2icon/sp002
$ ./subchain start




  • No labels