Support
- Burkhardt Rockel (Unlicensed)
- Beate Geyer
- Christian Steger
Support
The user support is organized by the CLM-Community working group SUPTECH. There are several sources from which community members can get support.
The community internal wiki contains a lot of technical and source code information.
In case of problems, please post your questions in the CLM-Community forum. Please include all information necessary to understand the problem (you can also upload files such as the error report, the YUSPECIF file showing your model configuration, or plots of the output).
To report bugs one has to fill out the “New issue” form for the respective Project (i.e. part of the model system) on the RedC page. Before you fill out the form, please make sure, that the issue you encountered is really a bug and has not been caused by another problem. Before a bug is reported the issue should be discussed in the forum. Developers are listed on the RedC page -> Projects.
Several other utilities are available which can be used by all community members, such as the Namelist Tool, the starter package, or some postprocessing software. An overview is available here.
In case of questions related to the community membership, please contact the coordination office.
The following table provides additional information for specific keywords/topics:
Acknowledgement | Please, do not forget to state that you used the “COSMO model in Climate Mode (COSMO-CLM)” and, please, also include the statement “COSMO-CLM is the community model of the German regional climate research community jointly further developed by the CLM-Community” in each publication. Please remember, that part of your scientific success relies on the work of those people providing the reference model setup, maintain the codes, etc. Therefore, it would be more than a sign of courtesy to offer them co-authorships once in a while. |
Administration tool | Tool for the CLM-Community administration and membership management . User and password are the same as formerly for RedC. |
Beginners | Special information for new members of the CLM-Community on the structure of the community and on the first steps with the model COSMO-CLM are provided in the section 'For Beginners' |
Bug reports | Report bugs in the model code (INT2LM, CCLM) through the clm-community forum of the management tool . Please report a potential bug first in the forum. In case it turns out to be a real bug, it can be added as such under the "new issue" menu (only managers, developers and reporters have permission create a new issue). If you want to become a part of a specific project, please contact the manager of that group:
|
Climatological background data | To create the external forcing data file, including e.g. land-sea-mask, soiltype, vegetation cover, in rotated coordinates please use the EXTPAR web front-end WebPEP . |
Forgotten password | Selfservice for community members to reset passwords. |
Forum and Wiki | Forum and Wiki of the CLM-Community can be accessed via the clm-community management tool. The user name and the initial passwort have been sent to each community member in the Welcome E-Mail. The discussions in the forum are public. To add an own contribution you need to log in. |
ICON-CLM | See the ICON-CLM section on this webpage. Support mailing list: icon-clm.support[at]listserv.dfn.de |
Initial- and Boundary Data | For some GCMs programs to convert the forcing data to INT2LM-format are already available. At the HPC system at Deutsches Klimarechenzentrum (DKRZ), some already converted datasets are available. An overview can be found here . |
Namelist settings | The namelist parameters are described in the User Guide of the COSMO model and also in the Namelist-Tool . The namelist settings for configurations for different regions and/or resolutions are also available in the Namelist-Tool . |
Output parameter list | An overview of the possible output variables of COSMO-CLM is availalbe here. |
SAMOA | The 'SAnity check for MOdels of the Atmosphere' -Tool is part of the COSMO-CLM Starter Package. The tool checks for some output variables if the values are within a reasonable range. The given margins in the file samoa.list might to be adapted according to the model domain. |
Source codes | From the wiki pages the source codes of the recommended version of COSMO-CLM and INT2LM can be downloaded. The user name and the initial passwort have been sent to each community member in the Welcome E-Mail. |
SPICE (ICON-CLM) | Runtime environment for ICON-CLM. SPICE (Starter Package for ICON-CLM Experiments ) is available via wiki together with further information and on Zenodo. See documentation. |
Starter package (COSMO-CLM) | Contains everything to run a COSMO-CLM simulation. The starter package is available on the wiki page. See documentation. |
Points of contact for community software and tools:
Software | Point of contact |
|---|---|
CCLM2CMOR | M.-E. Demory |
Climatological test suite | B. Rockel |
ETOOL | N. N. |
EXTPAR | J. Jucker |
INT2LM | B. Rockel |
namelist tool | I. Kirchner |
remapicon | N. N. |
SAMOA | N. N. |
SPICE (Starter Package for ICON-CLM Experiments) | B. Rockel |
Starter package COSMO-CLM | B. Rockel |
= CLM-Community login required
(Support)Support